DSC: padder equipment manufacturing
DSC: padder equipment manufacturing
Home        Tray Padding        Printing        Film Handling        Custom Machinery        Robotics        About DSC        Contact Us
DSC News

Tray Loader


DESCRIPTION: A free standing loading conveyor system attaching to the PAD-O-MATIC 360W to feed stacks of styrene foam packaging trays into the denester magazine of the PAD-O-MATIC 360W.

The TRAY LOADING CONVEYOR was designed to allow the person supplying trays to the denester of the PAD-O-MATIC 360W to stage a number of stacks of trays on the belt of the tray loading conveyor, eliminating the need to constantly feed the denester magazine, allowing time for other tasks. The belt of the tray loading conveyor is 36 inches from the floor, providing a means of supplying the padding machine without repetitive lifting.

Stacks of trays placed on the conveyor belt are advanced onto an elevator. The elevator lifts the stacks to the feed height of the padding machine denester, advances the stack forward onto the drop gates of the tray loading conveyor, and drops the stack into the denester of the padding machine.

The TRAY LOADING CONVEYOR is mounted on castors to provide easy movement to the padding machine, and attaches with docking pins. The tray loading conveyor power, control, and air are supplied by plugs into receptacles on the electrical enclosure of the padding machine.

The tray loading conveyor has a PLC controller and variable frequency drive control mounted in an enclosure. All electrical meets NEMA and JIC standards. There is a conveyor mounted OFF/ENABLE selector switch to control the loading conveyor.



  • MACHINE SIZE: 3 1/2 feet wide X 10 feet long X 8 feet high


  • POWER: 480 VAC, 3 PHASE, 1 AMP, 60 HZ (supplied from PAD-O-MATIC 360W). Other voltages and frequencies available, depending on padding machine voltage.

  • AIR: 1 CFM, 80 PSI minimum pressure clean dry air (supplied from PAD-O-MATIC 360W).

Copyright © 2006-7 Design Service Corporation
Home   |   About DSC   |   Contact Us